How to improve the effect of Cast Steel shots?

　Determine the working distance of sandblasting when cast Steel shots, closer to the surface of your parts processing does not bring better results. And it wastes the media. This is because the working distance reduces the size of the cast steel shots area, increases the cycle time, and can more easily crush the media, reducing the life of cast steel shots. This idea is in between, so that your cast steel shots material wear rate and speed to achieve the best balance. Hand suction suction system is six to eight inches. When using the direct injection system pressure, it should be kept 10 to 14 inches away. However, the closer to thin parts, the easier it is to warp them, no matter what sandblasting media are used. In addition to finding the most suitable distance, avoid the deformation of sandblasting parts. How to determine the best angle for Carbon Abrasive Cast Steel shots Many people believe that holding a gun at 90 degrees on the working surface will optimize the process of rust removal or decontamination of the workpiece surface.

　　In fact, cast Steel shots slows down the sand blasting process and makes the media wear faster. The equipment should aim at the surface of the position to be treated at an angle of 30-45 degrees, so that the abrasive wear can be minimized to achieve the best results.