How to choose high quality cut wire shot

Determining the material of cut wire shot mainly depends on the type of workpiece you want to clean up. Aluminum cut wire shot or stainless steel cut wire shot are generally used for non-ferrous metals. Ordinary steel weldments, castings, steel and so on are used for cut wire shot; the larger the diameter of cut wire shot, the higher the surface roughness after cleaning up, but the work efficiency is also very high; irregular shape of steel grit or steel wire cutting. Pill cleaning efficiency is higher than spherical pellets, but the surface roughness is also higher; high cleaning efficiency of the pellets on equipment wear faster; only the use of time, but this wear is not faster than production efficiency; the hardness of steel pellets and cleaning speed is proportional to, but is inversely proportional to life.

　　Therefore, the higher the hardness of cut wire shot, the faster the cleaning speed, but the short life consumption is large, so moderate hardness (about HRC40-50 is appropriate) the use of the best results. The function of the cut wire shot is to clean up the workpiece. The choice of the steel shot is directly proportional to the work efficiency. The correct choice of the steel shot is the key to improve the work efficiency