2018年9月3日星期一

How does the spiral steel pipe be stored?

1. The principle of the spiral steel pipe stacking is that under the precondition of stable stacker and security, the stacking of the varieties and specifications should be made, and the materials of different varieties should be stacked separately to prevent muddy and mutual erosion.
  2. It is prohibited to store articles that have eroded steel around the stacks of spiral steel pipes.
  3. ASTM A36 Welded Spiral Steel Pipe stacking bottom should be high, strong and smooth to prevent material from damp or deformation.
  4. the same materials are stacked separately in storage.
  5. the spiral steel pipe steel stacked in the open air, the underneath must have wooden pads or stones, the stacking surface is slightly inclined to benefit the drainage, and the material is placed straight to prevent the bending deformation.
  6. Spiral steel pipe stacking height, manual work of not more than 1.2m, mechanical homework of not more than 1.5m, stacking width not more than 2.5m;
  7. There should be a certain passage between the stack and the stack. The inspection passage is generally 0.5m, and the passage is generally 1.5-2.0m depending on the size of the material and the transport machinery.
  8. Angle steel and channel steel should be laid down in the open air, i.e. mouth down, I-beam should be placed upright, I-groove surface of steel can not be up, in order to avoid water rust;
  9. If the storehouse is high, if the storehouse is a sunny cement floor, it can be 0.1M high. If it is mud, it must be 0.2 to 0.5m high. If it is an open space, the cement floor mat will be 0.3 ~ 0.5m and the sand mat will be 0.5 to 0.7m.

Characteristics of welded steel pipe

 Low carbon structural steel or low alloy structural steel strip is rolled into tube blank according to a certain spiral angle (called forming angle), and then welded up by pipe seam. It can produce Welded steel pipe with narrow strip steel. Welded steel pipe is mainly used for pipeline transportation of oil and natural gas, and its specification is expressed by outer diameter * wall thickness. Welded steel pipe with one-side welding and two-side welding, welded steel pipes should ensure that the hydraulic test, weld tensile strength and cold bending performance to meet the requirements.
  Strength is generally higher than that of straight seam A53 Gr. B Carbon Steel Hot Rolled Welded Steel Pipe. Large diameter welded steel pipes can be produced with narrow blanks, and different diameter welded steel pipes can also be produced with blanks of the same width. However, compared with the straight seam pipe of the same length, the weld length is increased by 30~100% and the production speed is low. Therefore, small diameter welded pipes are mostly welded longitudinally, while large diameter welded steel pipes are mostly spiral welded.

Seamless steel pipe is widely used

Seamless steel pipe is widely used. The seamless steel pipe used for general use are rolled by ordinary carbon structural steel, low alloy structural steel or alloy structural steel, with the most output, which are mainly used as pipes or structural parts for conveying fluid. According to different uses, it can be divided into three types: A. supply according to chemical composition and mechanical properties; B. supply according to mechanical properties; C. supply according to hydraulic test. Seamless steel pipes supplied by class A and B shall also be subjected to hydraulic pressure tests if they are used for liquid pressure. Special purpose seamless steel pipes include seamless pipes for boilers, chemical and electric power, geological seamless pipes and petroleum JIS G3445 Cold Drawn Carbon Seamless Steel Pipe.
  Seamless steel pipe have hollow sections and are widely used as pipes for conveying fluids, such as oil, natural gas, gas, water and some solid materials. Compared with solid steel such as round steel, the steel tube has lighter weight and is an economic section steel at the same bending and torsion strength.
  It is widely used in the manufacture of structural parts and mechanical parts, such as oil drilling rod, automobile drive shaft, bicycle frame, and steel scaffold used in construction. It can improve the utilization of material, simplify the manufacturing process, save materials and work, and have widely used steel tube to make it.

The oil pipe is a seamless tube for furnace tubes

The oil pipe is a seamless tube for furnace tubes, heat exchangers and pipes of petroleum refineries.
  The steel pipe for geological drilling is a kind of steel pipe used by geological departments for core drilling. It can be divided into drill pipe, drill collar, core pipe, oil pipe and sedimentation pipe.
  Oil pipe is a kind of long steel with hollow section and no seam around it. Oil pipe is an economic section steel.
  It is widely used in the manufacture of structural and mechanical parts, such as API 5CT OCTG Seamless Steel Oil Pipe, automobile transmission shaft, bicycle frame and steel scaffolding used in construction movement. The use of oil cracking tube to make ring parts can improve material utilization and simplify.
  Manufacturing process, saving material and processing time, such as rolling bearing ring, Jack sleeve, etc., has been widely used to manufacture steel pipes. Petroleum cracking pipe is also an indispensable material for all kinds of conventional weapons. The barrel and barrel of gun should be made of oil pipe. According to the shape of cross section area, the oil pipe can be divided into circular pipes and special-shaped pipes. Because the area of oil pipe is the largest under the condition of equal circumference, more fluid can be transported by circular pipe.

Quality inspection of spiral steel pipe

According to the quality inspection results of spiral steel pipe, spiral steel pipe is usually divided into three categories: qualified products, repairs and scraps. Qualified products refer to spiral steel pipes whose external quality and internal quality meet the relevant standards or technical conditions for delivery and acceptance; repaired products refer to API 5L Large Diameter Welded Spiral Steel Pipe whose external quality and internal quality do not fully meet the standards and acceptance criteria, but which are allowed to be repaired and can meet the standards and acceptance conditions after repairing; scrap products refer to spiral steel pipes whose external quality and internal quality are not up to It is not allowed to meet the requirements of standard and acceptance conditions after repair or rework.
  Waste products are divided into two types: internal and external. Internal waste refers to scrap spiral steel pipe found in foundry plants or foundry workshops; external waste refers to scrap found after delivery, which is usually exposed in the process of mechanical processing, heat treatment or use, resulting in much greater economic losses than internal waste. In order to reduce the external waste, the batch spiral steel pipe should be sampled for experimental heat treatment and roughing before leaving the factory. The potential defects of spiral steel pipe should be found in the spiral steel pipe factory as far as possible, so that necessary remedial measures can be taken as soon as possible.

Classification of welded steel pipe

 Strength is generally higher than that of straight seam welded steel pipe. Large diameter welded steel pipe can be produced with narrow blanks, and different diameter welded steel pipe can also be produced with blanks of the same width. However, compared with the welded steel pipe of the same length, the weld length is increased by 30~100% and the production speed is low. Therefore, small diameter welded steel pipe are mostly welded longitudinally, while large diameter welded steel pipe are mostly spiral welded.
  Welded steel pipe is divided into two types: automatic submerged arc welded steel pipe and high frequency welded steel pipe.
  The spiral seam automatic submerged arc welded steel pipe is divided into two categories: API 5L X60 LSAW Welded Steel Pipe are generally welded with ordinary carbon steel Q235, Q235F and common low alloy structural steel 16Mn. welded steel pipe with Q235, Q235F, Q195 and other steels and used as low pressure fluid conveying pipes.
  There is no uniform product standard for spiral seam high frequency welded steel pipe, which is generally made of common carbon steel Q235, Q235F and other steel.

Now the use of seamless steel pipe is based on the overall quality control.

 From the manufacturer of seamless steel pipe, the choice of seamless steel pipe should be carried out in accordance with the normal market as far as possible. Now the main role of steel pipe is to be able to carry out liquid transportation, which can provide great convenience for people's life and work. Therefore, now a variety of different types of steel pipe, has become a lot of industries can see. Similarly, seamless steel pipes are now appearing, beginning to attract people's attention now, but also become the steel pipes used in many places now.
  This kind of seamless steel pipe is mainly made by the use of the whole metal, so there is no gap, want to improve the quality of seamless steel pipe, first of all, need to have a good technology, but also a variety of technology. So what kind of technical upgrading does this product need in production? First of all is the blank forming technology, because this kind of steel pipe is not welded, are through the blank for cold drawing, or cold forming, if it has no better technology in the blank forming, it will naturally make its product quality decline, not only affect its appearance, but also affect it. To the strength of the Cold Drawn Precision Seamless Steel Pipe for Mechanical Processing.
  Quality audit, product value, market advantage can be more convenient, in terms of products, objectivity is also relatively large.